Design & Reuse
Catalog of SIP Cores
System on Chip design resources
143 IP
51
0.118
Power on Reset IP, Input: 1.0V/3.3V, UMC 90nm SP process
Vrr=2V Vfr=1.95V, input VCCK=1.0V VCC3IO=3.3V, 3.3V Power On Reset, special request by ASAL, UMC 90nm SP/RVT Low-K Logic process....
52
0.118
Power on Reset IP, Input: 1.2V, UMC 0.11um HS/AE process
Power on reset(POR) block, UMC 0.11um HS/AE (AL Advance Enhancement) Logic process....
53
0.118
Power on Reset IP, Input: 1.2V, UMC 0.13um HS/FSG process
Vrr=0.75V Vfr=0.65V, input 1.2V, Core type, Power On Reset, UMC 0.13um HS/FSG Logic process....
54
0.118
Power on Reset IP, Input: 1.2V, UMC 0.13um HS/FSG process
Vrr=0.75V Vfr=0.65V, input 1.2V, Core type, Power On Reset, UMC 0.13um HS/FSG Logic process....
55
0.118
Power on Reset IP, Input: 1.2V, UMC 0.13um HS/FSG process
Vrr=0.8V Vfr=0.65V, VCC=1.2V, Ivcc=11.7uA, Core type, Power On Reset, UMC 0.13um HS/FSG Logic process....
56
0.118
Power on Reset IP, Input: 1.2V, UMC 0.13um SP/FSG process
Vrr=0.76V Vfr=0.66V, input 1.2V, Core type, Power On Reset, UMC 0.13um SP Logic(FSG) process....
57
0.118
Power on Reset IP, Input: 1.2V, UMC 0.13um SP/FSG process
Vrr=0.76V Vfr=0.66V, input 1.2V, Core type, Power On Reset, UMC 0.13um SP Logic(FSG) process....
58
0.118
Power on Reset IP, Input: 1.2V, UMC 90nm LL process
Vrr=0.7V, Vfr=0.65V, input VCCK=1.2V, Core Type Power On Reset, UMC 90nm Logic/Mixed-Mode LL/RVT Low-K process....
59
0.118
Power on Reset IP, Input: 1.5V - 3.9V, UMC 55nm SP process
3.9~1.5V (RTC Core Cell Library operating voltage+), Rise-relax voltage (Vrr), min. 1.6V (1.6V~2.3V) Power On Reset, UMC 55nm SP/RVT Low-K Logic proce...
60
0.118
Power on Reset IP, Input: 1.5V, UMC 0.15um SP process
Vrr=1.1V Vfr=0.95V, VCC=1.5V, B-type IO., Power On Reset, UMC 0.15um SP Logic process....
61
0.118
Power on Reset IP, Input: 1.8V, UMC 0.162um Logic process
Vrr=1.2V Vfr=1.0V, input 1.8V, Core type (with Self-Test Circuit), Power On Reset, UMC 0.162um Logic process....
62
0.118
Power on Reset IP, Input: 1.8V, UMC 0.18um eFlash/G2 process
Vrr=1.2V Vfr=1.0V, input 1.8V, Core type, Power On Reset, UMC 0.18um e-Flash process....
63
0.118
Power on Reset IP, Input: 1.8V, UMC 0.18um G2 process
FXPORD730HA0A 0.18um power on reset at the corner of D-type IO Vrr=1.2V Vfr=1V, Power On Reset, UMC 0.18um GII Logic process....
64
0.118
Power on Reset IP, Input: 1.8V, UMC 0.18um G2 process
Vrr=1.2V Vfr=1.0V, input 1.8V, Core type, Power On Reset, UMC 0.18um GII Logic process....
65
0.118
Power on Reset IP, Input: 1.8V, UMC 0.18um G2 process
Vrr=1.2V Vfr=1.0V, input 1.8V, Core type (with Self-Test Circuit), Power On Reset, UMC 0.18um GII Logic process....
66
0.118
Power on Reset IP, Input: 1.8V, UMC 0.18um G2 process
Vrr=1.2V Vfr=1.0V, input 1.8V, Core type, Power On Reset, UMC 0.18um GII Logic process....
67
0.118
Power on Reset IP, Input: 1.8V, UMC 0.18um LL process
Vrr=1.2V Vfr=1.1V, VCC=1.8V, Ivcc=12.2uA, Core type, Power On Reset, UMC 0.18um LL Logic process....
68
0.118
Power on Reset IP, Input: 2.5V - 3.3V, UMC 0.13um HS/FSG process
2.5V~3.3V POR, UMC 0.13um HS/FSG Logic process....
69
0.118
Power on Reset IP, Input: 3.3V, UMC 0.13um HS/FSG process
UMC 0.13um HS Logic process, Vrr=2.2V, without Vfr, A type IO, 3.3V Power On Reset....
70
0.118
Power on Reset IP, Input: 3.3V, UMC 0.13um HS/FSG process
0.13um HS process, 3.3V device vcc3I, Vrr=2.2V, Vfr=2V, Ivcc=13mA, Power On Reset, UMC 0.13um HS/FSG Logic process....
71
0.118
Power on Reset IP, Input: 3.3V, UMC 90nm SP process
Vrr=Vfr=2V, input VCC3IO=3.3V, 3.3V RTC Power On Reset, special request by MTD, UMC 90nm SP/RVT Low-K Logic process....
72
0.118
Power on Reset IP, UMC 0.11um HS/FSG process
Power on reset(POR) block, UMC 0.11um HS/copper Logic process....
73
0.118
Power on Reset IP, Vrr: 0.85V, Vfr: 0.75V, UMC 90nm LL process
Power On Reset (POR), UMC 90nm LL Logic process, RVT, Core type, Vrr=0.85V Vfr=0.75V....
74
0.118
Power on Reset IP, Vrr: 1.2V, Vfr: 1.0V, UMC 0.18um LL process
Vrr=1.2V, Vfr=1.1V, corner type, Power on Reset, UMC 0.18um LL process....
75
0.118
Power on Reset IP, Vrr: 1.2V, Vfr: 1.1V, UMC 0.18um LL process
Vrr=1.2V, Vfr=1.1V, corner type, Power on Reset, UMC 0.18um LL process....
76
0.0
1.16 V Bandgap voltage reference
180TSMC_BVR_01 a bandgap voltage reference produces temperature independent voltage level around 1.16V (at Bangap_Vref pin) using temperature dependen...
77
0.0
0.6V/10uA, 20uA Bandgap and V2I converter (Voltage to current)
55TSMC_BGV_02 is a reference voltage and current source that consists of bandgap voltage reference, voltage-to-current converter and current-voltage b...
78
0.0
30mA Inverting Regulated Charge Pump
The inverting charge pump delivers a regulated negative output voltage at loads of up to 30mA. The device operates with inputs from 1.62V to 2V to pro...
79
0.0
50mA, Capless High PSRR LDO Regulator for RF and Analog Applications in TSMC 28nm
LDO50MPVT28HPC is a linear regulator capable of supplying 40mA of highly regulated output current with programmable output voltages of 0.9V/1V/1.2V/1....
80
0.0
40mA, Capless High PSRR LDO Regulator for RF and Analog Applications in TSMC 28nm
LDO40MPVU28HPC is a linear regulator capable of supplying 40mA of highly regulated output current with programmable output voltages of 0.9V/1V/1.2V/1....
81
0.0
50mA, Capless High PSRR LDO Regulator for RF and Analog Applications in TSMC 28nm
LDO50MPVU28HPC is a linear regulator capable of supplying 40mA of highly regulated output current with programmable output voltages of 0.9V/1V/1.2V/1....
82
0.0
Band Gap Reference
The designated IP is a very low power, high precision band gap reference circuit intended for integration into 130nm CMOS technology System on Chips. ...
83
0.0
UBC (Universal Bias Controller), Power Management Unit (with LDO, CLDO, POR, LVD, BOD] - TSMC
The ARKT_UBC IP use for Power management system. consist of LDO, CLDO, POR, LVD, BOD, ARKT_UBC provides high accuracy and stable power supply. Thi...
84
0.0
DC-DC Buck Ultra Fast Response High Power Series ( Vin = 2.3-5.5V; Vo = 0.6-3.3V; Io = 1.5A ) - MagnaChip 350nm
The DCDC SGC67 is an ultra fast response, high output current, step down switched DC-DC regulator IP. It is the best supply solution for high power p...
85
0.0
DC-DC Buck Ultra Fast Response High Power Series ( Vin = 2.3-5.5V; Vo = 0.6-3.3V; Io = 3.0A ) - MagnaChip 350nm
The DCDC SGC67 is an ultra fast response, high output current, step down switched DC-DC regulator IP. It is the best supply solution for high power p...
86
0.0
Active antenna detector with load current limit
The antenna detector supplies an active antenna and is able to detect both open and short circuits. A current limiter restricts the antenna current to...
87
0.0
Active antenna detector with load current limit and supply current 140 uA
The antenna detector supplies an active antenna and is able to detect both open and short circuits. A current limiter restricts the antenna current to...
88
0.0
LDO Capless Fast Response Series ( Vin = 3.0-3.6V; Vo = 1.05-1.15V; Io = 10mA ) - Toshiba 40nm
The SGC75 are low-dropout (LDO), high current,fast response, low quiescent linear regulator IP solution for integration on SoC. It offers high power ...
89
0.0
LDO External NPN Device Series ( Vin = 1.6-3.6V; Vo = 1.05-1.15V; Io = 1A ) - Toshiba 40nm
The SGC79100 is a low-dropout, high current, fast response, low quiescent linear regulator IP solution with external NPN (or NMOS) power device for in...
90
0.0
LDO General purpose Ultra Fast Response Series ( Vin = 2.3-4.6V; Vo = 2.5V; Io = 50mA ) - GLOBALFOUNDRIES 65nm
The SGC75 are low-dropout (LDO), high current,fast response, low quiescent linear regulator IP solution for integration on SoC. It offers high power ...
91
0.0
LDO voltage regulator
The voltage regulator consists of a differential amplifier which compares reference voltage with voltage from a feedback divider. It adjusts the imped...
92
0.0
LDO voltage regulator (output voltage 1.8 V)
The voltage regulator consists of a differential amplifier which compares reference voltage with voltage from a feedback divider. It adjusts the imped...
93
0.0
LDO voltage regulator (output voltage 2.7 V)
The regulator stabilizes the external voltage (supply voltage) and forms an output level of the specified value. Adjustment is carried out by positive...
94
0.0
LDO voltage regulator (output voltage value 1.0 V, 1.2 V, 1.5 V, 1.8 V)
The regulator stabilizes the external voltage and forms an output level of the specified value. Adjustment is carried out by negative feedback through...
95
0.0
LDO voltage regulator (output voltage value 1.8 V, 2.1 V, 2.4 V, 2.7 V)
The regulator stabilizes the external voltage and forms an output level of the specified value. Adjustment is carried out by negative feedback through...
96
0.0
LDO voltage regulator (output voltage value 1.8 V, 2.4 V, 2.7 V, 3.0 V)
The regulator stabilizes the external voltage and forms an output level of the specified value. Adjustment is carried out by negative feedback through...
97
0.0
LDO voltage regulator (output voltage value 2.7 V, 3.0 V)
The regulator stabilizes the external voltage and forms an output level of the specified value. Adjustment is carried out by negative feedback through...
98
0.0
Advanced Power Controller w/ POR & BOR for PMU DC-DC and LDO ( Vin = 2.3-3.6V ) - Toshiba 40nm
The SGC21412 is an Advanced Power Controller for integration in SoC. SGC APC is based on a configurable core that is configured for each specific SoC,...
99
0.0
General Purpose Power On Reset_(POR) - TSMC
The ARKCHIPS_POR IP belongs to a family of Power Reset (POR) circuits POR : Power on reset circuit generates output flag signal once the power suppl...
100
0.0
NFC Power Management Unit (0.6/1.2/1.5 V output voltage, 10/20/50 uA output current, 2 MHz output clock frequency)
130GF_PMU_02 is a Power Management Unit (PMU) block designed to supply embedded integrated circuits with stable and precise voltage and current. IP sh...